При усовершенствовании средств автоматизации важно следить, чтобы трудности развития не превратились в развитие трудностей.

 

Связь с редакцией
Рассылка новостей

#7 2008

Timofeev A.V.  Enhanced CRM technology as a natural source of justified marketing data

The methodology of market dynamics data acquisition data recording embedded in CRM methodology and aiming at natural involvement of sales managers into marketing information gathering. For automatic data processing and quality evaluation of the estimates obtained, an original algorithm is applied based on ?-stable models application. An example of the methodology implementation on MS CRM platform is described.

Sokolov K.A.  An information system for procurement support

The need in procurement support system development for the subsidiaries of RAO UES of Russia is substantiated. Key parameters, featured properties, functionalities and possible development lines of Procurement Management system are described. The benefits obtained due to the system implementation at AEK Komienergo are calculated.

Zakharchenko V.E.  Process data reliability monitoring in process control systems

The possibility of evaluating sensor readings uncertainty (explicit and implicit) in process control systems using process history is discussed. A simulation model with interval estimates of parameters` reliability is used where the reliability evaluation includes the checks of all functional dependences specified for the process. The implementation of the model proposed is considered for power engineering controls.

Tyurin M.V.  Expert evaluation of telecommunications systems and computer networks under incomplete information

Methodological basis is a critical component of analysis and provision of telecommunications systems and computer networks (TSCN) durability. The paper discusses a method of TSCN durability indices analysis under incomplete information using fuzzy logic techniques.

Bakhtiyarov R.A.  Automation of in-plant transportation facilities using electric drives

The automation of a stacker crane used in workshops and warehouses of engineering plants is discussed. The positioning and addressing system implemented using optical sensors with polarized light source is described.

Polischuk A.G., Turkin A.N.  Next generation lighting LEDs from Cree

Power LEDs for various applications from Cree are overviewed, their advantages are discussed.

Payment terminals design: reviewing the approaches

Breakthrough growth of Russian payment terminal industry may soon be overshadowed by the advent of new technical problems which might make the designers change their approaches to hardware selection.

On computer control outlook

For more than 20 years Beckhoff has been actively propagating PC Control in industrial automation community and gained impressive progress in this segment. At Hannover Fair 2008, Intel participated as a co-exhibitor at Beckhoff PC Control showcase. This partnership is partially accounted for Intel`s consideration of embedded devices as a promising market whose growth is basically determined by automation technologies, while Beckhoff Automation offers an ideal platform for Intel`s technology presentation in the embedded device segment. The paper overviews the legacy, state-of-the-art, and future PC Control solutions.

Gusev A.M.  Hardware engineering for A-palnt`s upper control level workstations

A concept of workstation organization at A-plant`s upper control level is offered promising operation self-sufficiency increase and the survival in case of a malfunction in one of information management module`s nodes.

Discussing a Subject…
Computer simulation at industrial training simulators service
Introduction

Chernakov V.A.  Application experience of simulation complexes at the controls commissioning of the 3rd power unit of Kalinin A-Plant

Distinctive features of the state-of-the-art digital control system of the 3rd power unit of Kalinin A-Plant is discussed. The system was successfully commissioned in 2007. Simulation complexes developed within this project in the ENICAD integrated environment are briefly described.

Zimakov V.N.  On the development and application experience of new control systems debugging technology

The requirements to mathematical models used in modern control system debugging technology at nuclear power units (NPU) are discussed. The paper shows that for debugging such control systems, the models used employed in full-scale training simulators are the most acceptable. Due to the complexity of training simulator models for NPU, they should be developed using coding automation systems. An example of a real-life control system debugging using the approach described is cited.

Amelin S.V., Ivanchenko A.F.  Training simulators development for substations and Backbone networks of a Federal Power Company in Modus environment

The paper outlines the development and implementation of a training simulator for operations staff of substations of a Federal Power Company, dispatching staff of Backbone Network, and dispatching staff of Central Dispatching Service of a Federal Power Company. The training systems were implemented on the basis oа Modus toolkit. The promising project development lines are discussed.

Maghid S.I., Arkhipova E.N., Kudinov V.V., Bogachev O.A.  Training simulators for the personnel of modern power consuming plants

Design concepts of TEST JSC training simulators for the personnel of power consuming plants are discussed. The approach proposed was proven by the development of a complex operator training system for Northern Water Station and a full-scale custom simulator for the Training Center of Mosvodokanal Moscow Municipal Enterprice.

Godunov A.I., Mandrikov V.I.  Some aspects of estimating aviation simulator`s adequacy to aircraft

The problems of differential geometry invariants application for estimating the adequacy of real object`s and model`s behavior in the engineering testing of the correspondence of aircraft`s and aircraft simulator`s aerodynamics are discussed. The investigations undertaken are based on building canonical moving frames of various geometrical images.

Bonch-Bruevich V.V., Kremez S.A., Chirkov B.P.  Psychophysiological training simulator

The paper discusses custom psychophysiological simulators enabling the training of professionally significant features of attention and memory and the development of perception stability under close conditions. Such training systems combined with professional psychophysiological selection are a major key to transportation safety.

Coward B.A.  The increasing merging of dynamic simulation and APC technologies

With a case study of a project implemented by Honeywell on a demethanizer at a Middle East plant, the paper shows the benefits of simulation techniques and advanced process control synergy.

Samarina A.M., Yershova O.V.  The architecture of a training complex with a scaling function for aluminum plants

The paper discusses the architecture of training systems for aluminum industry. The systems include the functionalities enabling the realization of various educational and training tasks in effective process control.

Abrosimov M.B., Ghil`man E.A.  New capabilities of UTK toolkit for training simulators development

New functions of the latest release of UTK toolkit for process modeling and training systems engineering are outlined, and their future development is discussed.

Drevs Yu.G., Zen`kovich M.V., Lyubchenko A.S.  Simulation of automated molding lines

Basic concepts of simulation models development for automated molding lines are discussed. The case study of pouring and cooling section simulation is examined.

Dorokhov B.F., Bushnev D.V.  Industrial simulators based on ATLAS technology

Computerized training simulators developed on the basis of a video model of an industrial plant as a set of interrelated photos, P&IDs, videos, and process schematics. The IT used in simulator development and operation is called Atlas and comprises process modeling and video model development tools, descriptions of testing scenarios, database management, testing algorithms implementation, and training results derivation and storage.

Events

The 10th international Conference QNX-Russia-2008

Адрес редакции: 117997, Москва, Профсоюзная ул., д. 65, оф. 360
Телефон: (926) 212-60-97.
E-mail: info@avtprom.ru или avtprom@ipu.ru

© ООО Издательский дом "ИнфоАвтоматизация", 2003-2024 гг.

РассылкиSubscribe.Ru
Автоматизация в
промышленности